DeepARC

Witness yourself the new high speed formula of MIG/MAG welding! An extremely narrow welding arc (similar to a plasma arc) is achieved through a highly dynamic voltage controlsystem in the HighPULSE series welding unit. This new welding arc defines itself through several characteristics. The DeepARC process is perfect for use with mild and stainless steels as well as for aluminum and aluminum alloys. The DeepARC process is available as a standard in all units of the series SpeedMIG. Welcome to the future!

 

DeepArc (PDF Download)

30 % DEEPER PENETRATION

  • Deeper penetration due to high arc pressure
  • Guaranteed root penetration
  • Short, concentrated narrow arc

100% FASTER WELDING

The DeepARC process allows up to100 % higher welding speeds compared to the standard MIG/MAG arc


Examples (wire: 1.2 mm):

Mild steel:

d = 6 mm,

vs = 1,7 m/min

Stainless steel:

d = 2 mm

vs = 2,0 m/min

Aluminium:

d = 3 mm,

vs = 1,4 m/min

100% NO SPATTER ADHERENCE

  • Small, low-energy welding spatters
  • No adherence of the spatters

REDUCED QUANTITY OF WELDING LAYERS

  • Due to deeper penetration the preparation angle can be reduced
  • Reduced costs for material preparation
  • Less filler wire and less gas are needed

    PERFECT ROOT PENETRATION

    • High arc pressure
    • Welding with root penetration
    • No undercut

    NO UNDERCUT

    • Reduced heat input at the outer edges of the welded zone
    • Low re-inforcement
    • Nearly no undercut, not depending on the torch angle